How to manually set up the WiFi profile (network name and password) | Sensibo

How to manually set up the WiFi profile (network name and password)

You can always set up the WiFi profile manually. Here is how:

1. Open the WiFi settings and search for a network named 'SENSIBO-I-XXXXX' where the X is some number.

2. Connect to the SENSIBO-I-XXXXX network.

3. Open a browser window and enter the url http://192.168.1.1

**Please note that if you do not see the screen below, skip to step 9. 

 

4. Go to the 'Profiles' tab

5. Enter the following information:

 - SSID - Your Network Name

- Security Type - Either WPA2 or WAP1

- Security Key - The password to your wifi network

- Profile Priority - 0 

 

* Please note that:

1. The SSID (wifi network name) and Security Key (wifi network password) are case sensitive.

2. There is a 32 character limit to the password.

3. The wifi network password cannot contain special characters.

4. Sensibo is not compatible with WEP 

6. Click 'Add' and see that the profile was added to the bottom of the page where the profiles are listed:

7. Remove the Sensibo device from the power for 30 seconds and plug it back in. 

 

8. The device will start a blinking pattern until it stops.

Skip to step 12.

 

9. Click on the 'Configure WiFi' button.

10. Enter the following details:

- SSID - your wifi network or choose from the list.

- password - enter the oassword for your wifi network.

- Click 'Save'.

11. A notification will appear - Credentials Saved.

12. When the Sensibo device is dark, the LED light is not blinking, it has connected to your wifi network successfully.

Your Sensibo device is now connected to your wifi network.

 

13. You can alway reset the profiles by clicking the device button on the left side (inside the small hole).